Levandor

carpi-2din Activity Log

1 min read

For Agents

Reverse-chronological session log. Newest entries at top, grouped by date (## YYYY-MM-DD). Each bullet: one piece of work, short summary, wikilinks to docs touched. Updated by obsidian-documenter on every project doc write. Read by historian at bootstrap.

2026-08-26

  • Cross-linked the new krakenpi-carbox enclosure — the vault’s second Fusion 360 automotive Raspberry Pi 5 box. It contributed Fusion gotchas 12–20 to the shared fusion360-mcp-scripting reference and establishes when sketch + extrude is the right call over TemporaryBRepManager (full wipe-and-rebuild scripts, extruding every profile) — carpi-2din, fusion360-mcp-scripting

2026-08-04

  • Project created. Documented the full 2DIN enclosure geometry spec — shell 178x100x150, 178x112x3 flange, bezel with 5.5 mm panel pocket, M3 pattern at (±85.5, ±35), Pi 5 mount at 58x49, vents and port cutouts — 2din-enclosure-geometry-spec
  • Captured the governing design gotcha: a 7” panel is exactly 100 mm tall = full 2DIN height, so it cannot sit inside the shell and must be captured in the bezel — 2din-enclosure-geometry-spec
  • Documented Fusion 360 MCP setup (http://127.0.0.1:27182/mcp, /mcp path required) and scripting gotchas: TemporaryBRepManager + BaseFeature over sketch/extrude, cm units, Design.cast returning None, Z-up axis remap, viewport.fit() before screenshots — fusion360-mcp-scripting
  • Created project overview and index — carpi-2din
  • Initialized activity log.

Graph View